Tuesday, March 13, 2012

Accessory Drive Belts Replacing procedure for Ford, Mercury and Lincoln?


The procedure is similar for Ford Crown Victoria, Mercury Grand Marquis, Lincoln Town Car.      
Accessory Drive Belts
ADJUSTMENT
BELT ROUTINGS
INSPECTION
REMOVAL & INSTALLATION

Instructions are as follows:-----

Adjustment



Specific to:
Ford Crown Victoria 2008-2009
Lincoln Town Car 2008-2009
Mercury Grand Marquis 2008-2009
The accessory drive belt tension is automatically adjusted with a spring-loaded tensioner.

Belt Routings



Specific to:
Ford Crown Victoria 2008-2009
Lincoln Town Car 2008-2009
Mercury Grand Marquis 2008-2009


image 
Fig. Accessory drive belt routing-4.6L (VIN V and W) engines

Inspection



Specific to:
Ford Crown Victoria 2008-2009
Lincoln Town Car 2008-2009
Mercury Grand Marquis 2008-2009
Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. All worn or damaged drive belts should be replaced immediately.

Removal & Installation



Specific to:
Ford Crown Victoria 2008-2009
Lincoln Town Car 2008-2009
Mercury Grand Marquis 2008-2009
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Disconnect battery negative cable from battery and properly isolate to prevent accidental reconnection.
  3. Rotate the tensioner clockwise and remove the drive belt.

    Click image to see an enlarged view
    Fig. Accessory drive belt tensioner
To install:
  1. Rotate the tensioner clockwise.
  2. Route the belt around the pulleys.
  3. Slowly release the tensioner.

This details will help.
Thanks.



    

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html



No comments:

Post a Comment